Posts Tagged ‘green’

Why Energy Efficient Lighting?

Tuesday, April 1st, 2008

Lighting consumes 22% of the electrical power generated in the U.S. When you select energy-efficient lighting, you:• Save a lot of money;

• Reduce the need for additional power plants;

• Reduce greenhouse gases and other pollution; and,

• Are able to use lighting in ways you never thought possible.

Engineers on large remodeling projects find that energy-efficient lighting affords a higher payback than any other energy-efficient system. That includes heating, ventilation, air conditioning, appliances and computer equipment.

Sustainable resource consumption is everyone’s responsibility. Choosing energy-efficient lighting is the easiest way to save money on power. The choice is up to you. What you choose matters to you and the environment.

Here are the numbers

Friday, March 28th, 2008

1. According to a report published by the International Energy Agency (IEA), a global switch to efficient lighting systems would trim the world’s electricity bill by nearly one-tenth. The carbon dioxide emissions saved by such a switch would, it concludes, dwarf cuts so far achieved by adopting wind and solar power. According to Paul Waide, a senior policy analyst with the IEA and one of the report’s authors, “19% of global electricity generation is taken for lighting— that’s more than is produced by hydro or nuclear stations, and about the same that’s produced from natural gas.

2. Studies by the Heschong Mahone Group found that sales increased 40% in stores with good natural light.

3. Through the use of daylighting in design, builders can meet 25 to 33 percent of the necessary requirements to achieve a Silver LEED rating.

4. According to the federal Energy Star program: “If every American home replaced just one light bulb with an ENERGY STAR, we would save enough energy to light more than 2.5 million homes for a year and prevent greenhouse gases equivalent to the emissions of nearly 800,000 cars.”

How to Green Your Lighting

Friday, March 28th, 2008

What’s the Big Deal?

How we light up the places we live and work makes a big impact on how we feel. It also makes a big impact on the environment. The kind of bulbs, the kind of fixtures, the kind of power, and the habits we keep can all add up to a very significant greening. Start with the fact that a conventional incandescent bulb turns only around five to ten percent of its consumed energy into light, the rest goes out as heat. From there, there’s no limit to how green your lighting can be.  
1.
CFL: The better bulb

Compact florescent bulbs (CFLs) are those swirley little guys that look like soft-serve ice cream cones. Actually, they come in a myriad of different shapes, sizes, and colors of light. Economically speaking, they’re a great deal, too. CFLs cost a bit more than an incandescent, but use about a quarter as much energy and last many times longer (usually around 10,000 hours). It is estimated that a CFL pays for its higher price after about 500 hours of use. After that, it’s money in your pocket. Also, because CFLs release less heat, not only are they safer, but your cooling load is less in the summer. CFLs aren’t hard to find anymore, and many cities will give them away for free.

 Go to www.efficientlightingco.com  on how to get your CFLs. <br>
2.
Materials
Light isn’t all about the bulbs, though. Having eco-friendly lamps and light fixtures is key to greening your lighting. When scouting for new gear, keep your eyes out for lamps made with natural, recycled, or reused materials. Lights made from recycled materials include metal, glass, or plastic, and natural materials can include felt, cloth or wood. Interesting lamps that use reclaimed materials include these made from traffic signal lenses, and these made from wine bottles. Also, don’t be shy about borrowing ideas for reuse in your own projects. 
3.
Daylighting
By far, the best source of light we know is (yes, you guessed it) the sun, which gives off free, full-spectrum light all day. Make the most of daylight by keeping your blinds open (sounds obvious but you might be surprised). If you want to go a little farther, put in some skylights, or, of you are designing a home or doing a renovation, put as many windows on the south-facing side of the house as possible (or north-facing if you live in the southern hemisphere). To take it even further, sunlight can be “piped” inside via fiber optics and other light channeling technologies.  
4.
Good habits
As efficient as your lighting equipment might be, it doesn’t make sense to have lights on when no one’s around. Turn out lights in rooms or parts of the house where no one is. Teach your family and friends about it too and it will become second nature. If you want to get a little more exact, follow these rules: Standard incandescent: turn off even if you leave the room for just seconds. Compact fluorescent: turn off if you leave the room for 3 minutes. Standard fluorescent: turn off if you leave the room for 15 minutes. 

AMERICA’S MOST ICONIC LANDMARKS AND SKYSCRAPERS TO GO DARK FOR EARTH HOUR

Thursday, March 27th, 2008

Additional cities join World Wildlife Fund’s global climate change movement taking place on Saturday, March 29, 2008 at 8p.m.

Support for 2008’s Earth Hour (www.earthhour.org) continues to build as globally recognized landmarks and buildings, such as the Sears Tower and Golden Gate Bridge, as well as sports teams and corporations, including the Phoenix Suns, Hewlett Packard, Esurance and National Geographic Channel, join the climate change movement sweeping the world. On Saturday, March 29 at 8p.m. local time, millions of people around the world will turn off their lights to show how by working together we can make a difference in the fight against climate change. Starting in Christchurch, New Zealand; Earth Hour will roll through 14 time zones, wrapping up in the Pacific Time zone representative San Francisco, CA. Traversing more than 25 cities in 10 countries, Earth Hour will be the largest voluntary power down in history. To date, 25 cities around the globe have been designated by World Wildlife Fund as official Earth Hour flagship cities, including Atlanta, Chicago, Phoenix and San Francisco in the United States. As momentum builds, additional cities in the U.S. including Honolulu, HI; Denver, CO, Miami, FL, Charlotte, NC, Martha’s Vineyard, MA, and Homer Glen, IL are joining the movement by partnering with the local mayor’s office and staging their own Earth Hour events.

Some of the country’s tallest buildings including the John Hancock Building in Chicago and the Bank of America Plaza in Atlanta as well as iconic landmarks like the Georgia Aquarium and Alcatraz have all signed on to turn off their lights during Earth Hour. Sports teams from around the country including the Chicago Cubs, San Francisco Giants and Arizona Diamondbacks will also turn off select non-essential lighting on the exterior of their stadiums and arenas during the event. McDonald’s will turn off its golden arches in over 480 locations in Chicago land and Northwest Indiana. Hewlett Packard, the official National Technology Partner of Earth Hour, has demonstrated their commitment to green initiatives through their on-going involvement with WWF. They have signed on as a sponsor of Earth Hour this year and will to turn off the lighting at their corporate headquarters outside of San Francisco. National Geographic Channel, the national media partner for Earth Hour, will turn off non-essential lights at their headquarters in DC and will air nearly 100 TV spots advertising the movement. Esurance, a national partner as well, is adding Earth Hour to their long list of environmental initiatives they actively participate in each year.  Individuals and businesses from around the world can sign up to participate in Earth Hour at

www.earthhour.org.

Fluorescent Lights’ Mercury Poses Dim Threat

Wednesday, March 26th, 2008

They’re breakable, contain toxic material, and are becoming increasingly commonplace. But fears of mercury poisoning from new energy-efficient fluorescent bulbs are overplayed, experts say.Long billed as a “green” product for environmentally conscious consumers, compact fluorescent light bulbs (CFLs) are quickly becoming the norm in household lighting—and may soon replace traditional incandescent bulbs altogether.

But CFLs’ cool-burning illumination is made possible by a pinch of poison—about five milligrams of mercury sealed inside every glass tube—and the need for the element is unlikely to change anytime soon.

Mercury is a potent neurotoxin and long-lived environmental contaminant, and even the small amount present in CFLs poses a problem. When the bulbs break, either in the house or at a waste disposal site, their mercury content is released.

According to a few vocal CFL opponents, such as Fox News Web site’s “Junk Science” correspondent Steve Milloy, that makes the bulbs unsafe.

These critics have charged environmentalists with being uncharacteristically “pro-mercury” when it comes to the lights.

The critics often cite the recent story of a resident of Ellsworth, Maine, who amassed a clean-up bill of more than 2,000 U.S. dollars by shattering a single CFL in her home. The story originally appeared in the Ellsworth American and quickly spread to other newspapers, such as Canada’s National Post and the Washington Times.

But the enormous bill came about as a result of bad advice—a fact often omitted in follow-ups to the original article.

“There’s a lot of misleading information out there,” said Joel Hogue, president of Elemental Services and Consulting, an Ohio-based company specializing in the cleanup of sites contaminated with mercury. “But when people learn the facts, the level of hysteria dies down.”

Like with many other household products, Hogue said, the use of CFLs requires some commonsense precautions. But if a bulb breaks, his company’s clean-up services are not required.

“There’s an extremely small amount of mercury in those bulbs,” Hogue said. “It’s a very minimal risk” and can easily be cleaned up at home.

One CFL contains a hundred times less mercury than is found in a single dental amalgam filling or old-style glass thermometer, according to the U.S. Environmental Protection Agency (EPA).

The concerns over mercury have not resulted in any significant dimming of support for CFLs.

The governments of Canada and Australia recently announced plans to phase out the sale of incandescent bulbs by 2012, and similar “ban the bulb” efforts are taking place in countries around the world.

In March a coalition of environmental groups joined Philips Lighting, the world’s largest lighting manufacturer, in a new initiative aimed at transitioning the U.S. to CFLs by 2016.

Philips has announced plans to discontinue marketing incandescents in the U.S. and Europe by that date, and major retailers such as Wal-Mart have plans for greatly increasing their sale of CFLs.

The switch is occurring because CFLs are proven cost and energy-savers. Traditional incandescent bulbs are highly inefficient—about 90 percent of the energy they consume produces heat rather than illumination.

A compact fluorescent bulb can produce the same amount of light for less than quarter of the energy and last eight to ten times as long. A switch to CFLs would save an average household about 50 U.S. dollars a year in electricity bills, according to government estimates.

Because of these benefits, CFLs are widely seen as an “easy” first step for nations seeking to reduce global warming. The burning of coal for electrical power is a major source of atmospheric carbon dioxide, which is now widely believed to be changing the earth’s climate (see interactive overview of climate change).

According to a recent report by the Washington, D.C.-based Earth Policy Institute, a worldwide shift to CFLs would permit the closing of more than 270 coal-fired power plants. Switching to CFLs in the U.S. alone could save the energy output of 80 plants.

For environmentalists, the clincher is that by requiring less energy, CFLs will actually cut down on mercury pollution produced by coal burning, and EPA agrees.

“By using less electricity, CFLs help reduce mercury emissions from coal-burning power plants, which are the largest source of human-caused mercury emissions in the United States,” said agency press officer Ernest Jones. (Related: “Clean Coal? New Technology Buries Greenhouse Emissions” [May 2, 2006].)

Reuse, Recycle—And Don’t Vacuum

While their mercury doesn’t make CFLs unsafe, experts say, it does place them alongside many other household products—from paint to batteries—that need to be used and disposed of in a responsible manner.

Michael Bender directs the Vermont-based Mercury Policy Project, an organization dedicated to reducing mercury pollution worldwide. He said up to 95 percent of the mercury contained in CFLs can be recovered if the bulbs are recycled properly.

“The best option for managing a spent CFL is to recycle it. Short of that, the next best option is to safely store the lamp until an opportunity for recycling becomes available,” Bender said.

But many consumers don’t know where to recycle the light bulbs—or remain oblivious to the need for special disposal in the first place.

Recycling opportunities, however, should soon be increasing as CFLs become established as mainstream household lighting. Retailers such as Ikea have store-based collection centers for used bulbs, and a similar program is being developed by Home Depot in Canada.

“Recycling programs are already in place in many areas,” noted mercury clean-up expert Hogue. “Community leaders don’t need to reinvent the wheel.”

If recycling is not possible, used CFLs should be sealed inside a plastic bag and taken to a household hazardous waste disposal site, just as should batteries, oil-based paint, and motor oil, EPA recommends.

Web sites such as Earth 911 and Light Recycle can provide local disposal options.

And if a CFL does shatter on the floor, the greatest danger may be the broken glass.

But to minimize exposure to mercury vapor, EPA and other experts advise a few precautions.

Children and pets should stay away from the area, the agency says, and windows should be opened for at least 15 minutes so that vapors may disperse. Cleanup can be done by hand using disposable materials, the expersts add.

“Use rubber disposable gloves and scoop up the materials with stiff paper or cardboard,” Bender said. “Use sticky tape to pick up small pieces and powder, clean the area with a damp paper towel, and dispose of the materials in an outside trash can.”

“Never use a vacuum,” Hogue added. This, he said, will only disperse the mercury vapor and leave particles trapped inside the cleaner bag.

Scott Norris
for National Geographic News

May 18, 2007

How does a compact fluorescent light bulb work?

Tuesday, March 25th, 2008

 

Fluorescent light bulbs (including compact fluorescents) are more energy-efficient than regular bulbs because of the different method they use to produce light. Regular bulbs (also known as incandescent bulbs) create light by heating a filament inside the bulb; the heat makes the filament white-hot, producing the light that you see. A lot of the energy used to create the heat that lights an incandescent bulb is wasted. A fluorescent bulb, on the other hand, contains a gas that produces invisible ultraviolet light (UV) when the gas is excited by electricity. The UV light hits the white coating inside the fluorescent bulb and the coating changes it into light you can see. Because fluorescent bulbs don’t use heat to create light, they are far more energy-efficient than regular incandescent bulbs.

Click here to see purchase Efficient Lighting CFLs

What’s the difference between a compact fluorescent light bulb and a fluorescent bulb?
The primary difference is in size; compact fluorescent bulbs are made in special shapes (which require special technologies) to fit in standard household light sockets, like table lamps and ceiling fixtures. In addition, most compact fluorescent lamps have an “integral” ballast that is built into the light bulb, whereas most fluorescent tubes require a separate ballast independent of the bulb. Both types offer energy-efficient light.

www.efficientlightingco.com

What compact fluorescent light bulb do I buy to replace a 60-, 75-, 100- or 150-watt regular bulb? How are the watts calculated?

While a regular (incandescent) light bulb uses heat to produce light, a fluorescent bulb creates light using an entirely different method that is far more energy-efficient — in fact, 4-6 times more efficient. This means that you can buy a 15-watt compact fluorescent bulb that produces the same amount of light as a 60-watt regular incandescent bulb.

Don’t worry about the math, though — we make it easy for you to figure out which compact fluorescent bulb to buy by displaying the equivalent regular watts you’re used to prominently on the package. Just look for the wattage you would normally buy in a regular bulb. In case you’re curious, here are the watts needed by regular incandescent bulbs and compact fluorescent bulbs to produce the same amount of light.

California REDUCTION OF OUTDOOR LIGHTING

Monday, March 24th, 2008

On February 1, 2001, Governor Davis issued Executive Order D-19-01 stating, “substantial amounts of electricity are consumed through unnecessary outdoor lighting by retail establishments after business hours, including but not limited to, shopping centers, auto malls and dealerships.” The Executive Order requires retail business to substantially reduce unnecessary outdoor lighting wattage during non-business hours.

Please contact efficient lighting or check our our website to see how we can help reduce your exterior lighting!   www.efficientlightingco.com

Strategies Developed by the Energy Commission

These are provided as examples of measures that businesses may want to consider to maintain illumination necessary for the safety of the public, employees, and property, while reducing total electrical usage.

There are four ways in which light (therefore energy) is wasted:

  1. To have non-essential lighting energized especially after hours. Controls can greatly reduce the amount of energy consumed by exterior lighting.
  2. Using energy inefficient equipment.
  3. Sending light up into the atmosphere either by direct light or by reflected light. By using completely shielded (or IESNA cutoff) area or wall-mounted luminaires, light goes down instead of up.
  4. Over lighting. Not only does over lighting waste energy, it may create light adaptation hazards.

Quality exterior lighting involves selecting the correct equipment for the project, not over lighting, providing uniform lighting for security reasons, and minimizing the glare (non-productive light).

Examples of Measures

The following examples are measures that businesses may consider to maintain illumination levels necessary for the safety of the public, employees, and property, while reducing total electrical usage.

  • Evaluate existing exterior lighting systems and identify non-critical lighting. Clearly label all switching devices to save time and help employees identify which lights should be shut-off at specific times.
  • Use only energy efficient lamp technologies wherever possible such as metal halide, induction lamps, high-pressure sodium, and linear and compact fluorescent sources. Avoid using fluorescent sources that are not suited for low temperature operation in cold climate zones. Avoid using mercury vapor lighting systems. Incandescent sources should be avoided unless they are integrated with a control mechanism that significantly limits the time that they operate.
  • Use IESNA recommended light level ranges. Use the lower recommended values in order lower energy usage, yet stay within recommended values. Abnormally bright lights can create glare and deep shadows, which can make seeing extremely difficult. Illumination ratios between areas should be minimal (e.g., less than 10:1)
  • Locate outdoor lighting where it is needed. For example, locate outdoor lighting below tree canopies, not above.
  • In parking lots, use efficient and cutoff lighting fixtures that emit no light above the horizontal or into the sky, fixtures that emit no more than 2.5 percent of the lamp lumens upward. Use cutoff lighting fixtures for all lamps greater than 2800 lumens. This will minimize wasted light going up into the atmosphere.
  • In signage and retail, use color contrast to attract attention, rather than high levels of illumination. Provide reflective surfaces for lettering or other elements that need to be illuminated at night and illuminate only the lettering, not the background.

Lighting Controls

There are a number of excellent automatic lighting controls that may be used to turn off exterior lights when appropriate:

  1. Daylight controls, or photo sensors, used to turn off lights whenever adequate daylight is available.
  2. Energy management systems and timeclocks, used to limit lighting to within certain operating hours.
  3. Timer switches, used to turn on lights for only short duration.
  4. Motion sensors, used to either turn on lights, or turn up lights that have been dimmed, whenever an occupant is present.

www.efficientlightingco.com
 

Examples of possible uses of lighting controls

  • Evaluate and set specific outdoor lighting, as appropriate, to automatically lower or turn off after the close of business to the public, and/or after all employees have left the premises. After business hours, lower light levels to minimal levels, just enough to detect movement and provide sufficient security. Use timers, motion sensors, or an energy management system to turn-off or reduce lighting.
  • Some security lighting can be activated with motion sensors so that lights come on only when someone is in the immediate area (consult with local law enforcement). Energy efficient lamp sources ideal for motion sensors include fluorescent and induction lamps. When using “on-off” motion sensors for security lighting, avoid the use of sources that require a period of time to achieve full brightness (HID sources such as Metal Halide or High Pressure Sodium). Incandescent sources can also be an effective source for this type of application since it will only operate a limited time and is not sensitive to temperature effects.
  • HID sources can work well in conjunction with motion sensors that offer two levels of lighting (also called stepped ballasts or hi-lo). In these applications, the low level light is provided when no motion is detected. When the motion sensor detects motion, it triggers the lighting to go to the high light level. The hi-lo lighting may be appropriate in parking lots, parking structures, and in areas where safety and security are important.
  • Turn off display, advertising, and specialty lights after retail hours (for example after mid-night).

Other Information

The Lighting for Exterior Environments, PR-33-99 by the Illuminating Engineering Society of North America is one of the most helpful publications on exterior lighting. It can be ordered from their website www.iesna.org or by calling 212-248-5000, extenion 112. Please be sure to refer to publication number RP-33-99. Cost is around $45.

You can also find a wealth of free information on California International Darksky Association website at www.skykeepers.org/index.html or www.efficientlightingco.com . Here you’ll find suggested lighting ordinances, actual ordinances, and examples of good and bad outdoor lighting.

A National Equipment Manufacturers Association (NEMA) white paper includes information about common practices on outdoor lighting and how to prevent outdoor lighting problems. The paper can be found at: http://www.nema.org/products/div2/white_papers.html.

The Advanced Lighting Guidelines 2001 report from the California Energy Commission is now available at: www.newbuildings.org/guide_frame.htm
For more information about reducing outdoor lighting, please contact:

California Energy Commission
Energy Efficiency and Demand Analysis Division
Nonresidential Buildings Office
1516 Ninth Street, MS-26
Sacramento, CA 95814Gary Flamm 916-654-2817
Maziar Shirakh 916-654-3839

 or call Efficient Lighting at 310-808-9288 or visit our website at www.efficientlightingco.com

Lighting Retrofit Project in Cerritos, Ca

Thursday, February 21st, 2008

Sun West Properties located at 18303 Gridley Ave. in Cerritos is a two story office building which had 4 lamp 2X4 T1240watt fixtures. Efficient Lighting Co. assessed the situation and in conjunction with the local utility to come up with a plan to reduce their energy costs while giving them better lighting.

Efficient Lighting Co. updated their old fixtures to new energy efficient parabolic T8 fixtures while being able to secure a rebate as well to offset the cost of the installation for the client. This gave them twice the lumens from what they already had to a much brighter crisper lighting.

After checking with some of the employees they love it. They can see better and their attitude is better. One comment was made that it keeps them awake and they have more energy. Efficient Lighting is a proud leader in Energy Efficient Lighting and we look forward to making this happen for you as well.

Click here for more details

Call us for a free lighting survey.

The Benefits of Energy-Efficient Lighting.

Wednesday, February 20th, 2008

Lighting accounts for 20 to 25 percent of the electricity used annually in the United States. Lighting for industry, stores, offices, and warehouses represents from 80 to 90 percent of total lighting electricity use.If energy-efficient lighting was used everywhere it was profitable, the electricity required for lighting would be cut by 50 percent and aggregate national electricity demand would be reduced by 10 percent. Energy savings would exceed $12 billion a year while decreasing air pollution by five percent. This would be equivalent to taking 15 million cars off the road, resulting in less smog, acid rain and a slowing of global climate change. By the year 2010, the EPA’s target is to increase the Green Lights program to 6,000 participants for a total annual energy savings of 30.5 billion kilowatt-hours. The estimated annual impact of fulfilling this is a 7.5 million metric ton reduction in green house emissions, which is equal to taking over one million cars off U.S. highways or planting over two million acres of trees.

CFL Comparison - Same Brightness, Less Wattage

Tuesday, February 19th, 2008

Click here for our cfl comparison