Archive for the ‘efficient lighting’ Category

Efficient Lighting founder named Top 30 Under 30

Wednesday, September 24th, 2008

Vu Thai Efficient Lighting

http://www.inc.com/30under30/2008/

#11 Vu Thai

Efficient Lighting

Age: 27
Location: Gardena, CA
2007 Revenue: $2 million
Employees: 12
Year founded: 2007
Website: www.efficientlightingco.com

Efficient Lighting manufactures compact fluorescent lamps, as well as interior and exterior light fixtures, which use up to 75 percent less than traditional fixtures and last six to 10 times longer. Most of Thai’s business comes from companies that are making the switch thanks to rebates and incentives from California’s Public Utilities Commission. Efficient Lighting is now working with other states’ utilities commissions as well. Thai says despite all the buzz about going green these days, we’ve only seen “the tip of the market,” leaving his company poised for even further growth.

DIY Home Energy Audits

Wednesday, August 20th, 2008

Energy costs continue to rise, placing ever-greater pressure on households. And the energy you use to heat and cool your home is a large part of your carbon footprint.

By knowing what to look for you can conduct your own home energy audit. Here’s how to get started.

1. Get to Know Your Energy Bills

Bills are never fun, but don’t forget that they contain valuable information along with the pain. Compare your heating and cooling costs by month for as many years past as you can, and look for trends in usage or obvious changes. Do you see any spikes? Can you remember why? Your utility can make older bills available to you by calling customer service.

Note both the kilowatt hours you are typically using as well as the amount your utility is charging per KWH. Get to know what it is that you are paying for every month.

2. Check out The Daily Green’s Checklist

Download our checklist here so you’ll be able to keep track of what you find, and prioritize improvements based on importance and your budget.

3. Locate Air Leaks

Simple leaks can sap home energy efficiency by 5 to 30% a year, according to the U.S. Department of Energy. So take a close look at places where two different building materials meet, such as corners, around chimneys, where pipes or wires exit and along the foundation. Make sure good seals form around doors and windows, and that no mortar is cracked. Any gaps or holes should be plugged and/or caulked.

Use the incense test: carefully (avoiding drapes and other flammables) move a lit stick along walls; where the smoke wavers, you have air sneaking in. And heating or cooling sneaking out.

Make sure the floor of your attic, including the hatch, is insulated, and that the material isn’t crumbling or compacted, which means it has lost its effectiveness. Similarly, check your basement ceiling, as well as basement walls. Hot water pipes and furnace ducts should be insulated. So should exterior walls (determine this by carefully removing the cover from a power plug, or drill a small hole in the back of a closet).

If you live in snow country, a simple test of insulation levels is to see if snow melts from your roof faster than from neighbors’ roofs. If so, you are probably losing too much heat.

If you find any problems, call in a professional, or go DIY and buy some fresh insulation yourself. Learn more about insulation here.

4. Examine Heating and Cooling Equipment

Not surprisingly, heating and cooling usually account for the biggest home energy loads. To reduce waste, check to see if your furnace filters look dirty. If so, swap them out (usually needed every month or two during the heating season). Or invest in an electrostatic permanent filter, which cuts down on waste and does a much better job of cleaning the air. If you have central air conditioning, check the coils both inside (usually in the basement) and outside. If they have dirt on them, carefully vacuum it off (you may need to first remove the protective grilles).

Make sure all your vents are open in rooms you want conditioned, but close the ones in rooms you hardly use. Ensure vents are clean and unobstructed. Vacuum away any dust.

Examine ductwork for dirt streaks, which mark leaks. You can often fix problems with duct tape or insulation. If your ducts look very dirty or worn, call a professional to get an estimate on a thorough cleaning or replacement. Also put on your calendar: annual pro inspection of your entire heating and cooling system.

5. Analyze Your Appliances

Appliances are major energy users, so your task should be to identify models that may be costing you a lot, and to find ways to trim waste. Buy or borrow a Kill A Watt Electric Usage Monitor. All you do is plug it into a wall socket, and then insert the plug for the electronic device that you wish to monitor. It will give you detailed info on energy use, and even has a “money button” to show you how much the unit costs you to operate.

Begin by checking your major appliances with the Kill A Watt. If older units are found to cost you a lot, you have motivation to upgrade to a new high-efficiency model (and make sure it is Energy Star certified).

If your fridge and freezer are using too much juice, you may simply need to turn down the temperature dials, or clean or repair seals. In general the EPA recommends keeping refrigerators at 37 degrees F and freezers at 3 degrees. You may also not have realized how much certain appliances require, from hair dryers to heated water beds, so you may decide to use less important items more sparingly.

If you don’t have a Kill A Watt, you can still estimate how much energy an appliance uses with the following formula: (Wattage x Hours Used Per Day ÷ 1000 = Daily Kilowatt-hour (kWh) consumption (1 kilowatt (kW) = 1,000 Watts). The wattage of an appliance will be stamped on the item. To get the annual consumption, multiply this by the number of days you use the appliance during the year (divide the time by 3 to account for the idling time of your refrigerator). Calculate the annual cost to run an appliance by multiplying the kWh per year by your local utility’s rate per kWh consumed.

6. Look for Energy Vampires

Ever heard of an “energy vampire” or “phantom load”? When electronics like TVs, DVD players and cell phone chargers are plugged in but not on, they still draw power, resulting in about 8% of our annual electric bills.

It’s simple to stop the drain: look around your house, and unplug any unused devices you find! To make it even easier, plug your electronics into a power strip, and switch that off when you are finished channel surfing, jamming or charging up. It will keep the energy vampires at bay.

7. See the Light

Lighting eats up about 10% of a typical electric bill. Swap out high-wattage bulbs with lower users, ideally CFLs. Start with one or two bulbs in the places where you have lights on the longest; you don’t need to rush out and try to replace every bulb all at once. Also be aware that rapid on and off switching decreases the life of CFLs, so it may not be worth it to install the pricier bulbs in places like closets, where you rarely have the lights on. In such areas, try a lower-wattage regular bulb, like a 40 W instead of a 60 W.

Consider how you use lighting in each room. Instead of always hitting the main overheads, would your lifestyle be better served by installing some low-wattage task lighting? Think desk and reading lamps or even night-lights instead. Get rid of halogen torch-style floor lamps, which use a tremendous amount of energy. Also consider installing motion detectors, which are especially good for halls and exterior lights, since you don’t have to worry about people accidentally leaving them on.

check out www.buy-cfls.com for energy efficient lighting fixtures and lamps

8. Gauge the Results

After you have made some improvements, revisit your audit steps in a month or two. Get our your energy bills, and compare. Did your usage drop? Consider going back through the steps above, looking for any appliances or areas you missed before. Want more savings? Go deeper with a Web-based audit tool, such as this one.

It also may be time to bring in the pros for a full-service, high-tech energy audit. Call your utility to see if it subsidizes the service (some offer it free during part of the year), and ask if it can recommend local providers. Learn more about the industry here.

Why Energy Efficient Lighting?

Tuesday, April 1st, 2008

Lighting consumes 22% of the electrical power generated in the U.S. When you select energy-efficient lighting, you:• Save a lot of money;

• Reduce the need for additional power plants;

• Reduce greenhouse gases and other pollution; and,

• Are able to use lighting in ways you never thought possible.

Engineers on large remodeling projects find that energy-efficient lighting affords a higher payback than any other energy-efficient system. That includes heating, ventilation, air conditioning, appliances and computer equipment.

Sustainable resource consumption is everyone’s responsibility. Choosing energy-efficient lighting is the easiest way to save money on power. The choice is up to you. What you choose matters to you and the environment.

How to Green Your Lighting

Friday, March 28th, 2008

What’s the Big Deal?

How we light up the places we live and work makes a big impact on how we feel. It also makes a big impact on the environment. The kind of bulbs, the kind of fixtures, the kind of power, and the habits we keep can all add up to a very significant greening. Start with the fact that a conventional incandescent bulb turns only around five to ten percent of its consumed energy into light, the rest goes out as heat. From there, there’s no limit to how green your lighting can be.  
1.
CFL: The better bulb

Compact florescent bulbs (CFLs) are those swirley little guys that look like soft-serve ice cream cones. Actually, they come in a myriad of different shapes, sizes, and colors of light. Economically speaking, they’re a great deal, too. CFLs cost a bit more than an incandescent, but use about a quarter as much energy and last many times longer (usually around 10,000 hours). It is estimated that a CFL pays for its higher price after about 500 hours of use. After that, it’s money in your pocket. Also, because CFLs release less heat, not only are they safer, but your cooling load is less in the summer. CFLs aren’t hard to find anymore, and many cities will give them away for free.

 Go to www.efficientlightingco.com  on how to get your CFLs. <br>
2.
Materials
Light isn’t all about the bulbs, though. Having eco-friendly lamps and light fixtures is key to greening your lighting. When scouting for new gear, keep your eyes out for lamps made with natural, recycled, or reused materials. Lights made from recycled materials include metal, glass, or plastic, and natural materials can include felt, cloth or wood. Interesting lamps that use reclaimed materials include these made from traffic signal lenses, and these made from wine bottles. Also, don’t be shy about borrowing ideas for reuse in your own projects. 
3.
Daylighting
By far, the best source of light we know is (yes, you guessed it) the sun, which gives off free, full-spectrum light all day. Make the most of daylight by keeping your blinds open (sounds obvious but you might be surprised). If you want to go a little farther, put in some skylights, or, of you are designing a home or doing a renovation, put as many windows on the south-facing side of the house as possible (or north-facing if you live in the southern hemisphere). To take it even further, sunlight can be “piped” inside via fiber optics and other light channeling technologies.  
4.
Good habits
As efficient as your lighting equipment might be, it doesn’t make sense to have lights on when no one’s around. Turn out lights in rooms or parts of the house where no one is. Teach your family and friends about it too and it will become second nature. If you want to get a little more exact, follow these rules: Standard incandescent: turn off even if you leave the room for just seconds. Compact fluorescent: turn off if you leave the room for 3 minutes. Standard fluorescent: turn off if you leave the room for 15 minutes. 

Lumens, Foot-candles and bright shiny beads….

Thursday, March 27th, 2008

In defining how bright something is, we have two things to consider.1. How bright it is at the source- How Bright is that light?
2. How much light is falling on something a certain distance away from the light.

Lets’ do some definitions now……
We’re going to talk about “foot-candles”.This one’s simple. Get a birthday cake candle. Get a ruler. Stick the candle on one end of the ruler. Light the candle. Turn out the lights. Sing Happy Birthday to Doc. It was his 47th on the 23rd. OK, quiet down. Enough of that nonsense. One foot-candle of light is the amount of light that birthday cake candle generates one foot away.That’s a neat unit of measurement. Why? Say you have a lamp. You are told it produces 100 foot candles of light. That means at one foot from the lamp, you will receive 100 foot candles of light.A Physics teacher is going to tell you that light measured on an object is INVERSELY PROPORTIONAL to the distance the object is from the light source. That’s a very scientific and math rich way of saying, the closer you are to the light bulb, the brighter that bulb is
Now, lets get to LUMENS.
A LUMEN is a unit of measurement of light. It measures light much the same way. Remember, a foot-candle is how bright the light is one foot away from the source. A lumen is a way of measuring how much light gets to what you want to light! A LUMEN is equal to one foot-candle falling on one square foot of area.So, if we take your candle and ruler, lets place a book at the opposite end from the candle. We’d have a bit of a light up if we put the book right next to the candle, you know. If that book happens to be one foot by one foot, it’s one square foot. Ok, got the math done there. Now, all the light falling on that book, one foot away from your candle equals both…….1 foot candle AND one LUMEN!
Summing it all up:
Foot-candles are a measurement of light at an illuminated object.
Lumens are a metric equivalent to foot-candles in that they are measured at an object you want to illuminate.

AMERICA’S MOST ICONIC LANDMARKS AND SKYSCRAPERS TO GO DARK FOR EARTH HOUR

Thursday, March 27th, 2008

Additional cities join World Wildlife Fund’s global climate change movement taking place on Saturday, March 29, 2008 at 8p.m.

Support for 2008’s Earth Hour (www.earthhour.org) continues to build as globally recognized landmarks and buildings, such as the Sears Tower and Golden Gate Bridge, as well as sports teams and corporations, including the Phoenix Suns, Hewlett Packard, Esurance and National Geographic Channel, join the climate change movement sweeping the world. On Saturday, March 29 at 8p.m. local time, millions of people around the world will turn off their lights to show how by working together we can make a difference in the fight against climate change. Starting in Christchurch, New Zealand; Earth Hour will roll through 14 time zones, wrapping up in the Pacific Time zone representative San Francisco, CA. Traversing more than 25 cities in 10 countries, Earth Hour will be the largest voluntary power down in history. To date, 25 cities around the globe have been designated by World Wildlife Fund as official Earth Hour flagship cities, including Atlanta, Chicago, Phoenix and San Francisco in the United States. As momentum builds, additional cities in the U.S. including Honolulu, HI; Denver, CO, Miami, FL, Charlotte, NC, Martha’s Vineyard, MA, and Homer Glen, IL are joining the movement by partnering with the local mayor’s office and staging their own Earth Hour events.

Some of the country’s tallest buildings including the John Hancock Building in Chicago and the Bank of America Plaza in Atlanta as well as iconic landmarks like the Georgia Aquarium and Alcatraz have all signed on to turn off their lights during Earth Hour. Sports teams from around the country including the Chicago Cubs, San Francisco Giants and Arizona Diamondbacks will also turn off select non-essential lighting on the exterior of their stadiums and arenas during the event. McDonald’s will turn off its golden arches in over 480 locations in Chicago land and Northwest Indiana. Hewlett Packard, the official National Technology Partner of Earth Hour, has demonstrated their commitment to green initiatives through their on-going involvement with WWF. They have signed on as a sponsor of Earth Hour this year and will to turn off the lighting at their corporate headquarters outside of San Francisco. National Geographic Channel, the national media partner for Earth Hour, will turn off non-essential lights at their headquarters in DC and will air nearly 100 TV spots advertising the movement. Esurance, a national partner as well, is adding Earth Hour to their long list of environmental initiatives they actively participate in each year.  Individuals and businesses from around the world can sign up to participate in Earth Hour at

www.earthhour.org.

Efficient Lighting is now on Technorati!

Wednesday, March 26th, 2008

Efficient Lighting is now on Technorati!

www.efficientlightingco.com

Please add us if you have an account! Thanks!

Technorati Profile

Energy Star Light Bulbs are Helping to Change the World

Wednesday, March 26th, 2008

Americans are more than making good on their pledges to help fight climate change by replacing their lights with Energy Star qualified CFLs (compact fluorescent lights). EPA estimates that Energy Star CFL sales for 2007 were nearly double those in 2006, accounting for approximately 20 percent of the light bulb market in the U.S. According to market data, sales of Energy Star qualified CFLs have risen dramatically over the last two years. In 2006, it is estimated that the market share jumped to about 11 percent, compared to a market share consistently under 5% in the early part of the decade. Sales in 2007 totaled approximately 290 million bulbs.

Energy Star retail partners such as Walmart, Lowes, Home Depot, Costco, Menards, Ace Hardware and Sams Club have played an important role in educating consumers about the importance of saving energy and the value of these products. “More and more Americans are seeing the light - that protecting the environment, while saving money, is as easy as changing a bulb,” said EPA Administrator Stephen L. Johnson. “Together, we are brightening our country’s future, one Energy Star CFL at a time.” “By switching to CFLs at home and at work, Americans are increasing energy efficiency and furthering the President’s vision to increase the advanced technologies that will help meet the nation’s growing demand for energy,” U.S. Department of Energy (DOE) Secretary Samuel W. Bodman said. “Using CLFs is a quick and easy way that Americans can save energy and money everyday, while also protecting the environment.”

Energy Star qualified CFLs use about 75% less energy and last up to ten times longer than incandescent bulbs. It is important for consumers to look for CFLs that have earned the government’s ENERGY STAR label in order to ensure the best performance. Energy Star qualified models have a minimum lifetime of 6,000 hours, maintain their light output over time, and are more energy efficient than standard CFLs. One Energy Star qualified bulb can save about $30 or more in energy costs over its lifetime. The average home has approximately 30 light fixtures. If every U.S. household replaced just one light bulb or fixture with an Energy Star, our country would save more than $600 million each year in energy costs and prevent greenhouse gas emissions equivalent to those of more than 800,000 cars. To date, the national Energy Star Change a Light campaign has received more than 1 million pledges from Americans across the country to change nearly 4 million light bulbs to Energy Star CFLs, equating to potential savings of more than $100 million in energy costs and the prevention of more than 1.5 billion pounds of greenhouse gas emissions.

 To join Americans already taking the ENERGY STAR Change a Light, Change the World pledge, visit http://www.energystar.gov/changealight Energy Star is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy designed to save money and protect the environment through energy efficient products and practices. For general information, visit: http://www.energystar.gov Energy Star was introduced by EPA in 1992 as a voluntary, market-based partnership to reduce greenhouse gas emissions through energy efficiency. The US Department of Energy joined EPA in this effort and today, the Energy Star label can be found on more than 50 different kinds of products. Products that have earned the Energy Star designation prevent greenhouse gas emissions by meeting strict energy-efficiency specifications set by the government.

Fluorescent Lights’ Mercury Poses Dim Threat

Wednesday, March 26th, 2008

They’re breakable, contain toxic material, and are becoming increasingly commonplace. But fears of mercury poisoning from new energy-efficient fluorescent bulbs are overplayed, experts say.Long billed as a “green” product for environmentally conscious consumers, compact fluorescent light bulbs (CFLs) are quickly becoming the norm in household lighting—and may soon replace traditional incandescent bulbs altogether.

But CFLs’ cool-burning illumination is made possible by a pinch of poison—about five milligrams of mercury sealed inside every glass tube—and the need for the element is unlikely to change anytime soon.

Mercury is a potent neurotoxin and long-lived environmental contaminant, and even the small amount present in CFLs poses a problem. When the bulbs break, either in the house or at a waste disposal site, their mercury content is released.

According to a few vocal CFL opponents, such as Fox News Web site’s “Junk Science” correspondent Steve Milloy, that makes the bulbs unsafe.

These critics have charged environmentalists with being uncharacteristically “pro-mercury” when it comes to the lights.

The critics often cite the recent story of a resident of Ellsworth, Maine, who amassed a clean-up bill of more than 2,000 U.S. dollars by shattering a single CFL in her home. The story originally appeared in the Ellsworth American and quickly spread to other newspapers, such as Canada’s National Post and the Washington Times.

But the enormous bill came about as a result of bad advice—a fact often omitted in follow-ups to the original article.

“There’s a lot of misleading information out there,” said Joel Hogue, president of Elemental Services and Consulting, an Ohio-based company specializing in the cleanup of sites contaminated with mercury. “But when people learn the facts, the level of hysteria dies down.”

Like with many other household products, Hogue said, the use of CFLs requires some commonsense precautions. But if a bulb breaks, his company’s clean-up services are not required.

“There’s an extremely small amount of mercury in those bulbs,” Hogue said. “It’s a very minimal risk” and can easily be cleaned up at home.

One CFL contains a hundred times less mercury than is found in a single dental amalgam filling or old-style glass thermometer, according to the U.S. Environmental Protection Agency (EPA).

The concerns over mercury have not resulted in any significant dimming of support for CFLs.

The governments of Canada and Australia recently announced plans to phase out the sale of incandescent bulbs by 2012, and similar “ban the bulb” efforts are taking place in countries around the world.

In March a coalition of environmental groups joined Philips Lighting, the world’s largest lighting manufacturer, in a new initiative aimed at transitioning the U.S. to CFLs by 2016.

Philips has announced plans to discontinue marketing incandescents in the U.S. and Europe by that date, and major retailers such as Wal-Mart have plans for greatly increasing their sale of CFLs.

The switch is occurring because CFLs are proven cost and energy-savers. Traditional incandescent bulbs are highly inefficient—about 90 percent of the energy they consume produces heat rather than illumination.

A compact fluorescent bulb can produce the same amount of light for less than quarter of the energy and last eight to ten times as long. A switch to CFLs would save an average household about 50 U.S. dollars a year in electricity bills, according to government estimates.

Because of these benefits, CFLs are widely seen as an “easy” first step for nations seeking to reduce global warming. The burning of coal for electrical power is a major source of atmospheric carbon dioxide, which is now widely believed to be changing the earth’s climate (see interactive overview of climate change).

According to a recent report by the Washington, D.C.-based Earth Policy Institute, a worldwide shift to CFLs would permit the closing of more than 270 coal-fired power plants. Switching to CFLs in the U.S. alone could save the energy output of 80 plants.

For environmentalists, the clincher is that by requiring less energy, CFLs will actually cut down on mercury pollution produced by coal burning, and EPA agrees.

“By using less electricity, CFLs help reduce mercury emissions from coal-burning power plants, which are the largest source of human-caused mercury emissions in the United States,” said agency press officer Ernest Jones. (Related: “Clean Coal? New Technology Buries Greenhouse Emissions” [May 2, 2006].)

Reuse, Recycle—And Don’t Vacuum

While their mercury doesn’t make CFLs unsafe, experts say, it does place them alongside many other household products—from paint to batteries—that need to be used and disposed of in a responsible manner.

Michael Bender directs the Vermont-based Mercury Policy Project, an organization dedicated to reducing mercury pollution worldwide. He said up to 95 percent of the mercury contained in CFLs can be recovered if the bulbs are recycled properly.

“The best option for managing a spent CFL is to recycle it. Short of that, the next best option is to safely store the lamp until an opportunity for recycling becomes available,” Bender said.

But many consumers don’t know where to recycle the light bulbs—or remain oblivious to the need for special disposal in the first place.

Recycling opportunities, however, should soon be increasing as CFLs become established as mainstream household lighting. Retailers such as Ikea have store-based collection centers for used bulbs, and a similar program is being developed by Home Depot in Canada.

“Recycling programs are already in place in many areas,” noted mercury clean-up expert Hogue. “Community leaders don’t need to reinvent the wheel.”

If recycling is not possible, used CFLs should be sealed inside a plastic bag and taken to a household hazardous waste disposal site, just as should batteries, oil-based paint, and motor oil, EPA recommends.

Web sites such as Earth 911 and Light Recycle can provide local disposal options.

And if a CFL does shatter on the floor, the greatest danger may be the broken glass.

But to minimize exposure to mercury vapor, EPA and other experts advise a few precautions.

Children and pets should stay away from the area, the agency says, and windows should be opened for at least 15 minutes so that vapors may disperse. Cleanup can be done by hand using disposable materials, the expersts add.

“Use rubber disposable gloves and scoop up the materials with stiff paper or cardboard,” Bender said. “Use sticky tape to pick up small pieces and powder, clean the area with a damp paper towel, and dispose of the materials in an outside trash can.”

“Never use a vacuum,” Hogue added. This, he said, will only disperse the mercury vapor and leave particles trapped inside the cleaner bag.

Scott Norris
for National Geographic News

May 18, 2007

How does a compact fluorescent light bulb work?

Tuesday, March 25th, 2008

 

Fluorescent light bulbs (including compact fluorescents) are more energy-efficient than regular bulbs because of the different method they use to produce light. Regular bulbs (also known as incandescent bulbs) create light by heating a filament inside the bulb; the heat makes the filament white-hot, producing the light that you see. A lot of the energy used to create the heat that lights an incandescent bulb is wasted. A fluorescent bulb, on the other hand, contains a gas that produces invisible ultraviolet light (UV) when the gas is excited by electricity. The UV light hits the white coating inside the fluorescent bulb and the coating changes it into light you can see. Because fluorescent bulbs don’t use heat to create light, they are far more energy-efficient than regular incandescent bulbs.

Click here to see purchase Efficient Lighting CFLs

What’s the difference between a compact fluorescent light bulb and a fluorescent bulb?
The primary difference is in size; compact fluorescent bulbs are made in special shapes (which require special technologies) to fit in standard household light sockets, like table lamps and ceiling fixtures. In addition, most compact fluorescent lamps have an “integral” ballast that is built into the light bulb, whereas most fluorescent tubes require a separate ballast independent of the bulb. Both types offer energy-efficient light.

www.efficientlightingco.com

What compact fluorescent light bulb do I buy to replace a 60-, 75-, 100- or 150-watt regular bulb? How are the watts calculated?

While a regular (incandescent) light bulb uses heat to produce light, a fluorescent bulb creates light using an entirely different method that is far more energy-efficient — in fact, 4-6 times more efficient. This means that you can buy a 15-watt compact fluorescent bulb that produces the same amount of light as a 60-watt regular incandescent bulb.

Don’t worry about the math, though — we make it easy for you to figure out which compact fluorescent bulb to buy by displaying the equivalent regular watts you’re used to prominently on the package. Just look for the wattage you would normally buy in a regular bulb. In case you’re curious, here are the watts needed by regular incandescent bulbs and compact fluorescent bulbs to produce the same amount of light.